home *** CD-ROM | disk | FTP | other *** search
-
- --- README FILE FOR RECONFIG 2.1 ---
-
- Reconfig allows you to quickly change to different DOS configurations on your
- hard disk. A configuration is comprised of the Autoexec.bat and Config.sys
- files. Reconfig helps you to maintain a database of up to 100 of these
- configurations with its built-in editor and drop-down menus. To run the
- program, just type RECONFIG (after installing it first).
-
- Once you have installed Reconfig, you will be able to change to your normal
- configuration by typing: RECONFIG NORMAL
- This will copy your "normal" configuration to the files Autoexec.bat and
- Config.sys. Reconfig will then automatically execute a reboot.
-
- Automatically defined for you is a minimal configuration, for when you want
- to try out new software without any memory-resident software loaded. To load
- the minimal configuration, type: RECONFIG MINIMAL
-
- If you wanted to change your configuration, but did not want to have an
- automatic reboot, simply add the word NOBOOT at the end of the command.
- For example: RECONFIG NORMAL NOBOOT
-
- You are probably maintaining different configurations already. You might be
- using a text editor to make changes to Autoexec.bat and Config.sys, only to
- have to change them back when you want your original configuration. Use
- Reconfig to define your own configurations. Some examples of configurations
- you might want to maintain are: WINDOWS, NOSIDEKICK, HOSTMODE, etc.
-
-
- HARDWARE REQUIREMENTS
-
- IBM-compatible microcomputer with 256K memory running DOS 2.0 or later, and
- a hard disk.
-
-
- INSTALLATION
-
- Type INSTALL, and then press the Enter key.
-
- If you want to install Reconfig to a directory other than \RECONFIG, type
- INSTALL [directory-name] For example, INSTALL REEK
- Notice that the directory-name should not include a leading backslash.
-
-
- LIST OF FILES ON THIS DISKETTE
-
- INSTALL BAT Reconfig hard disk installation program
- README List of files on this diskette, and order form
- RECONFIG PGM Reconfig Program (must be installed first)
- REBOOT COM Program that is used by Reconfig to reboot your computer
-
- A file called RECONFIG.BAT is created by the installation process, and is
- placed in the root directory of Drive C. You can move this file to any
- directory that is in your PATH statement.
-
-
- NOTE
-
- If you would like an invoice sent, please let us know. An order form has
- been included below:
-
-
-
-
- ORDER FORM
-
-
- Make check Optimal Solutions of NH
- payable to: 6 Salem Road
- Atkinson, NH 03811
-
- ============================================================
- Date: PO #:
- ============================================================
- Qty Description Cost Extension
- ------------------------------------------------------------
- | | |
- | Reconfig 2.1 | $35 | $
- | (includes quick reference card) | |
- | | |
- | | |
- | Other products available: | |
- | | |
- | Turnkey 3.1 - The Demo Version | $10 | $
- | | |
- | Turnkey 3.1 - The Personal Version| $49 | $
- | | |
- | Turnkey 3.1 - The Menu Builder's | $295 | $
- | Version | |
- | | |
- ------------------------------------------------------------
- Total: $
-
- Checks and money orders accepted.
-
- Your Name:
- ------------------------------------------------
- Address:
- ------------------------------------------------
- :
- ------------------------------------------------
- City:
- ------------------------------------------------
- State:
- ------------------------------------------------
- Zip:
- ------------------------------------------------
-
-
- Comments: